/*---------------------------------------------------------------------*/
/* --- STC MCU Limited ------------------------------------------------*/
/* --- STC 1T Series MCU Demo Programme -------------------------------*/
/* --- Mobile: (86)13922805190 ----------------------------------------*/
/* --- Fax: 86-0513-55012956,55012947,55012969 ------------------------*/
/* --- Tel: 86-0513-55012928,55012929,55012966 ------------------------*/
/* --- Web: www.STCMCU.com --------------------------------------------*/
/* --- Web: www.STCMCUDATA.com  ---------------------------------------*/
/* --- QQ:  800003751 -------------------------------------------------*/
/* 如果要在程序中使用此代码,请在程序中注明使用了STC的资料及程序            */
/*---------------------------------------------------------------------*/

#include	"config.h"
#include	"STC8A_Timer.h"
#include	"STC8A_GPIO.h"
#include	"STC8A_NVIC.h"

/*************	功能说明	**************

程序演示5个定时器的使用, 均使用16位自动重装.

定时器0做16位自动重装, 中断频率为100000HZ，中断函数从P6.7取反输出50KHZ方波信号.

定时器1做16位自动重装, 中断频率为10000HZ，中断函数从P6.6取反输出5KHZ方波信号.

定时器2做16位自动重装, 中断频率为1000HZ，中断函数从P6.5取反输出500HZ方波信号.

定时器3做16位自动重装, 中断频率为100HZ，中断函数从P6.4取反输出50HZ方波信号.

定时器4做16位自动重装, 中断频率为50HZ，中断函数从P6.3取反输出25HZ方波信号.

下载时, 选择时钟 24MHz (可以在配置文件"config.h"中修改).

******************************************/

/*************	本地常量声明	**************/


/*************	本地变量声明	**************/


/*************	本地函数声明	**************/



/*************  外部函数和变量声明 *****************/



/************************ IO口配置 ****************************/
void	GPIO_config(void)
{
	GPIO_InitTypeDef	GPIO_InitStructure;				//结构定义

	GPIO_InitStructure.Pin  = GPIO_Pin_HIGH | GPIO_Pin_3;			//指定要初始化的IO, GPIO_Pin_0 ~ GPIO_Pin_7, 或操作
	GPIO_InitStructure.Mode = GPIO_PullUp;			//指定IO的输入或输出方式,GPIO_PullUp,GPIO_HighZ,GPIO_OUT_OD,GPIO_OUT_PP
	GPIO_Inilize(GPIO_P6,&GPIO_InitStructure);	//初始化
}

/************************ 定时器配置 ****************************/
void	Timer_config(void)
{
	TIM_InitTypeDef		TIM_InitStructure;						//结构定义
	TIM_InitStructure.TIM_Mode      = TIM_16BitAutoReload;	//指定工作模式,   TIM_16BitAutoReload,TIM_16Bit,TIM_8BitAutoReload,TIM_16BitAutoReloadNoMask
	TIM_InitStructure.TIM_ClkSource = TIM_CLOCK_1T;		//指定时钟源,     TIM_CLOCK_1T,TIM_CLOCK_12T,TIM_CLOCK_Ext
	TIM_InitStructure.TIM_ClkOut    = DISABLE;				//是否输出高速脉冲, ENABLE或DISABLE
	TIM_InitStructure.TIM_Value     = 65536UL - (MAIN_Fosc / 100000UL);		//初值,
	TIM_InitStructure.TIM_Run       = ENABLE;					//是否初始化后启动定时器, ENABLE或DISABLE
	Timer_Inilize(Timer0,&TIM_InitStructure);					//初始化Timer0	  Timer0,Timer1,Timer2,Timer3,Timer4
	NVIC_Timer0_Init(ENABLE,Priority_0);		//中断使能, ENABLE/DISABLE; 优先级(低到高) Priority_0,Priority_1,Priority_2,Priority_3

	TIM_InitStructure.TIM_Mode      = TIM_16BitAutoReload;	//指定工作模式,   TIM_16BitAutoReload,TIM_16Bit,TIM_8BitAutoReload,TIM_16BitAutoReloadNoMask
	TIM_InitStructure.TIM_ClkSource = TIM_CLOCK_1T;		//指定时钟源, TIM_CLOCK_1T,TIM_CLOCK_12T,TIM_CLOCK_Ext
	TIM_InitStructure.TIM_ClkOut    = DISABLE;				//是否输出高速脉冲, ENABLE或DISABLE
	TIM_InitStructure.TIM_Value     = 65536UL - (MAIN_Fosc / 10000);			//初值,
	TIM_InitStructure.TIM_Run       = ENABLE;					//是否初始化后启动定时器, ENABLE或DISABLE
	Timer_Inilize(Timer1,&TIM_InitStructure);					//初始化Timer1	  Timer0,Timer1,Timer2,Timer3,Timer4
	NVIC_Timer1_Init(ENABLE,Priority_0);		//中断使能, ENABLE/DISABLE; 优先级(低到高) Priority_0,Priority_1,Priority_2,Priority_3

	TIM_InitStructure.TIM_ClkSource = TIM_CLOCK_1T;		//指定时钟源,     TIM_CLOCK_1T,TIM_CLOCK_12T,TIM_CLOCK_Ext
	TIM_InitStructure.TIM_ClkOut    = DISABLE;				//是否输出高速脉冲, ENABLE或DISABLE
	TIM_InitStructure.TIM_Value     = 65536UL - (MAIN_Fosc / 1000);				//初值
	TIM_InitStructure.TIM_Run       = ENABLE;					//是否初始化后启动定时器, ENABLE或DISABLE
	Timer_Inilize(Timer2,&TIM_InitStructure);					//初始化Timer2	  Timer0,Timer1,Timer2,Timer3,Timer4
	NVIC_Timer2_Init(ENABLE,NULL);		//中断使能, ENABLE/DISABLE; 无优先级

	TIM_InitStructure.TIM_ClkSource = TIM_CLOCK_12T;	//指定时钟源,     TIM_CLOCK_1T,TIM_CLOCK_12T,TIM_CLOCK_Ext
	TIM_InitStructure.TIM_ClkOut    = ENABLE;					//是否输出高速脉冲, ENABLE或DISABLE
	TIM_InitStructure.TIM_Value     = 65536UL - (MAIN_Fosc / (100*12));		//初值
	TIM_InitStructure.TIM_Run       = ENABLE;					//是否初始化后启动定时器, ENABLE或DISABLE
	Timer_Inilize(Timer3,&TIM_InitStructure);					//初始化Timer3	  Timer0,Timer1,Timer2,Timer3,Timer4
	NVIC_Timer3_Init(ENABLE,NULL);		//中断使能, ENABLE/DISABLE; 无优先级

	TIM_InitStructure.TIM_ClkSource = TIM_CLOCK_12T;	//指定时钟源,     TIM_CLOCK_1T,TIM_CLOCK_12T,TIM_CLOCK_Ext
	TIM_InitStructure.TIM_ClkOut    = ENABLE;					//是否输出高速脉冲, ENABLE或DISABLE
	TIM_InitStructure.TIM_Value     = 65536UL - (MAIN_Fosc / (50*12));		//初值
	TIM_InitStructure.TIM_Run       = ENABLE;					//是否初始化后启动定时器, ENABLE或DISABLE
	Timer_Inilize(Timer4,&TIM_InitStructure);					//初始化Timer4	  Timer0,Timer1,Timer2,Timer3,Timer4
	NVIC_Timer4_Init(ENABLE,NULL);		//中断使能, ENABLE/DISABLE; 无优先级
}


/******************** 主函数**************************/
void main(void)
{

	GPIO_config();
	Timer_config();
	EA = 1;

	while (1);
}