Status, Tuning and Diagnostics

	Request packet: “Request Status Packet”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_STATUS)

	Request packet: “Autoset Fast Threshold”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_AUTOSET_FAST_THRESHOLD)

	Request packet: “Request Diagnostic Data”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_DIAGNOSTIC_DATA)

	Request packet: “Request Misc Data”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_512_BYTE_MISC_DATA)

	Request packet: “Write 512-byte Misc Data”
		SendCommandData(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_WRITE_512_BYTE_MISC_DATA, txtMiscData.Text)

	Request packet: “Request Netfinder Packet”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_NETFINDER_PACKET)



DPP Configuration

	Request packet: “Text Configuration”

		Send ASCII Command Text, Filters/Removes Commands By Device Type
			SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_CONFIG_PACKET_TO_HW)

		Send ASCII Command Text Verbatim (No filters or changes)
			SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_CONFIG_PACKET_EX)

	Request packet: “Text Configuration Readback”

		Read Full Configuration, Except SCA Settings
			SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_FULL_READ_CONFIG_PACKET)
		
		Read Selected Configuration Settings for Status Updates
			SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_READ_CONFIG_PACKET)

		Read ASCII Command Text Verbatim (No filters or changes)
			SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_READ_CONFIG_PACKET_EX)

		Read All SCA Configuration Settings
			SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SCA_READ_CONFIG_PACKET)



Spectrum Acquisition

	Request packet: “Enable MCA/MCS”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_ENABLE_MCA_MCS)

	Request packet: “Disable MCA/MCS”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_DISABLE_MCA_MCS)

	Request packet: “Request and clear Spectrum plus Status”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_CLEAR_SPECTRUM_STATUS)

	Request packet: “Request Spectrum plus Status”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_SPECTRUM_STATUS)



Digital Oscilloscope

	Request packet: “Arm Digital Scope”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_ARM_DIGITAL_OSCILLOSCOPE)

	Request packet: “Request Digital Scope Data”
		SendCommand(modDP5_Protocol.TRANSMIT_PACKET_TYPE.XMTPT_SEND_SCOPE_DATA)



Command Function Types (Module modSendCommand)

	Send Commands 
		Public Sub SendCommand(ByRef XmtCmd As modDP5_Protocol.TRANSMIT_PACKET_TYPE)

	Send Commands With Additional Data
		Public Sub SendCommandData(ByVal XmtCmd As modDP5_Protocol.TRANSMIT_PACKET_TYPE, ByVal DataOut As String)