;===========================================================================
;  This file was generated using:
;  NI-VISA Driver Development Wizard version 4.1
;===========================================================================
;
;  This file is for use with Windows XP/2000. This will not work on Windows
;  Vista.  This Windows Setup Information File contains the information
;  NI-VISA needs in order to access your instrument.  Do not modify the
;  contents of this file unless you are sure about what you are doing.
;
;===========================================================================
;
;  Installation:
;  To apply the contents of this file to a system's settings, copy this file
;  to %SystemRoot%\inf and reboot the computer.  If the device was
;  installed before this file is copied, the device will need to be removed
;  from the "Unknown Devices" class in the Windows Device Manager.
;
;===========================================================================
;
;  Removal:
;  Remove this file and its associated .PNF file (if it exists) from
;  %SystemRoot%\inf.  Either reboot the computer, or perform a
;  "Scan for hardware changes" from the Windows Device Manager.
;
;===========================================================================

[Version]
Signature=$WINDOWS NT$
Class=visaUsbDevice
ClassGUID={A3330EDF-239D-4206-833B-1D58952613D5}
Provider=%Vendor0%
DriverVer=02/03/2013,1.0


[DefaultInstall.nt]
CopyFiles=NIVIUSBK_Device_CopyFiles_Inf

[DestinationDirs]
NIVIUSBK_Device_CopyFiles_Inf = 17

[NIVIUSBK_Device_CopyFiles_Inf]
LabVIEW_WinUSB.inf

[SourceDisksNames]

[SourceDisksFiles]

[ClassInstall32.nt]
AddReg=AddClass_AddReg

[AddClass_AddReg]
HKR,,,0,%DeviceClassString%
HKR,,Icon,,"-20"
HKR,,IconPath,0x00010000,"%11%\setupapi.dll,-20"

[Manufacturer]
%Vendor1%=USBList

[USBList]
%USB\VID_10C4&PID_842A.DeviceDesc%=NIVIUSBK_Inst, USB\VID_10C4&PID_842A

[PreCopySection]
HKR,,NoSetupUI,,1

[NIVIUSBK_Inst]
AddReg=NIVIUSBK_Inst_AddReg

[NIVIUSBK_Inst.Services]
Addservice = NIVIUSBK, 0x00000002, NIVIUSBK_AddService

[NIVIUSBK_AddService]
DisplayName    = %NIVIUSBK.SvcDesc%
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_DEMAND_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\NIVIUSBK.sys

[NIVIUSBK_Inst_AddReg]

[Strings]
Vendor0="Amptek Inc"
Vendor1="Amptek Inc"
USB\VID_10C4&PID_842A.DeviceDesc="DP5 Digital Pulse Processor"
DeviceClassString="NI-VISA USB Devices"
NIVIUSBK.SvcDesc="NI-VISA USB Driver"

SERVICE_BOOT_START = 0x0
SERVICE_SYSTEM_START = 0x1
SERVICE_AUTO_START = 0x2
SERVICE_DEMAND_START = 0x3
SERVICE_DISABLED = 0x4

SERVICE_KERNEL_DRIVER = 0x1
SERVICE_ERROR_IGNORE = 0x0
SERVICE_ERROR_NORMAL = 0x1
SERVICE_ERROR_SEVERE = 0x2
SERVICE_ERROR_CRITICAL = 0x3