20140925

====================================
Linux (LibUsb): (gccDppConsoleLinux)
====================================
0. You must have the libusb-1.0 developers package installed.
1. Copy the gccDppConsoleLinux project.
2. Open a terminal to the project directory.
3. Type "make all" then enter.
4. Wait until the project compiles.
5. Login as root (if not already).
6. Copy the executable to the bin directory. (ex. "cp gccDppConsole /usr/local/bin").
7. Connect your tuned/configured DPP device to a USB port.
8. Run the example. (gccDppConsole)


=========================================================================
Portable MinGW32 (LibUsb with WinUSB Backend): (project gccDppConsoleWin)
=========================================================================
1. Copy the gccDppConsoleWin project.
2. Open a MinGW Shell terminal to the project directory.
3. Run "makeall.bat" or type "mingw32-make all" then enter.
4. Wait until the project compiles.
5. Connect your tuned/configured DPP device to a USB port.
6. Run the example. (gccDppConsole)